20Khz fluxless ultrasonic dip tinning welding Ultrasonic Soldering iron Pots China supplier
20Khz ultrasonic dip tinning welding Ultrasonic Solder Pots
Parameter
Model No. | RPS-DS20 | |
Ultrasonic Frequency | 20Khz | |
Maximum Output | 1000 Watt | |
Temperature Range | 150 ~ 400 °C | |
Power Supply | 220V / 50-60 Hz | |
Ultrasonic Generator | Size | 250(W) x 310(L) x 135(H) mm |
Weight | 5 Kg | |
Feature | Ultrasonic Amplitude Adjustable | |
Pot dimension | 20*15cm | |
Avail Soldering Matrial | ITO Glass, AL, Mo, Cu etc., |
Description
We offer a variety of methods to acoustically activate molten metal. Another popular method is to immerse a Power Probe’s Wear-Tip directly into the molten material. The ultrasonic energy will remove dissolved gases and enhance grain structure refinement. The Permendur Power Probe offers the ability to acoustically activate molten metal in continuous or batch casting operations.
Ultrasonic soldering is used to join materials with either a metallurgical or mechanical bond.
A metallurgical bond is formed when the oxide from the base metal is removed through ultrasonic cavitation and implosion in the solder. The solder then comes in to contact with the base metal and the ionic attraction between the two forms a bond. A tin or lead solder bonded to copper is an example of this.
A mechanical bond usually involves no oxide on the base material. The cavitation and implosion in the solder create forces that agitate the materials and form an interlocking mechanical bond.
Coating a ceramic with solder is an example of this process.
When to use Ultrasonic Soldering
There are two main reasons for using Ultrasonic Soldering:
1. To eliminate the need for flux in the soldering process
2. To apply solder to ceramics and similar materials
The advantages of removing flux from the process are that there is no need for post-process
cleaning and wicking caused by surface tension from the flux is removed. Eliminating post-process
cleaning has the obvious benefit of cost saving for both the process and the flux itself. The benefit of
eliminating wicking is that the solder coating on the base material can be better controlled.
Application
- Aluminum components
- Ferrite components
- Glass components
- Silicon wafers
- Ceramic components
- Semiconductor chips
- Metals etc.
Characteristics
- Easy soldering upon un-bondable material (metal, glass, ceramics) by simple dipping process.
- No need for flux
- Reliable bonding/sealing
- Best used in difficult, small-surface places with limited access
- Ceramic components
- Semiconductor chips
- Metals etc.
- Previous:High power 20Khz Ultrasonic extraction equipment for CBD oil
- Next:China ultrasonic rubber cutting machine manufacturers for cheese cake cutting
Q1.What kind material of the horn?
A. Titanium alloy, we also customized aluminum hom for customer before.
Q2.What’s the time of delivery?
A. For Conventional hom, 3 days, for customized hom 7 work days.
Q3.Does ultrasonic extraction also require the addition of a chemical catalyst?
A. No . but some time need Mechanical stiring.
Q4.Can the device work continously?
A. Yes ,it can work 24hours continously.
Q5.What’s the Processing capacity of one set ultrasonic extraction equipment?
A. Different hor different Processing capacity, for 2000W Nine section whip horm can dealing 2L~10Lmin.
Q6.What’s the warranty of your sonicator equipment?
A. All equipment one year warranty.