Phepelo ea motlakase ea ultrasonic

28KHZ PipiEctric Ultranoc Putge Terbic Pitnent Frequency

28Khz Piezoelectric Ultrasonic Power Generator High Frequency

Tlhaloso e khutšoane:

Tlhaloso e khutšoane:



    Lintlha tsa sehlahisoa
    LBH
    Li-tag tsa lihlahisoa

    28KHZpiezoelecticorlec matla a motlakase a holimo

    Tlhaloso

    Khafetsa:15khz ~ 70khzMatla:5000w ka max
    TLHOKOMELISO:LaolaJenereithara:Jeka ea dijithale
    Sebetsa:PlcKhafetsa:500hz
    Lebitso:Jenereithara e phahameng ea ultranyoc
    Lebone le phahameng:

    jenereithara ea matla oa matla oa Ultrasonic

    ,

    jenereithara e phahameng ea ultranyoc

    28KHZ Piezeoelectric Ultrasoc Geneent bakeng sa matla a matla a matla a matla a matla a matla

    Paramente:

    NthoParamente
    Matla5000w ka max
    Khafetsa± 500hz
    Mocheso o sebetsang≤50 ℃
    Khafetsa20Khz ~ 70khz
    Ho bala bokhoni30000 Item
    Amplitet Acluture10% ~ 100%
    Palo ea li-volts110v / 220v / 380v
    PotolohoDijithale, o arohane

    Jakrante ea Ultrasonic ea Ultrasoni e boetse e tsejoa e le Jenen Generet ea Matla a Sealtrasonic, PUSELETSO EA PASTRASING SCEPING ANDRASING.

    Kamora lilemo tse hlalosang le ntlafatso e sebetsang, RPS - Soning Soning Geneenina Mochini o na le tlhahiso e matla mosebetsing le tlhahiso e sa tsitsang. Bakeng sa likarolo tse kholo tsa polasetiki tse welding, mochini o ka fihla mojaro o felletseng. Matla a morao-rao a ho thibela ho etsa hore sehlahisoa se se ke sa senyeha hang-hang, 'me mochini o sebelisoa nako e telele ntle le tahlehelo. Potoloho ea setso ea Analog e ntlafatsoa ho potoloha ea potoloho, e le hore ho laola mochini ho itlhahloba. Ho sitisoa pakeng tsa Vibrari le Vierrator. Insulation ha e bake litlhase. Sena se ntlafatsa mofuta oa k'hamphani ea rona mme o lumella lihlahisoa hore li rekisoe linaheng tsa Asia e le hore basebelisi ba lihlahisoa ha ba na matšoenyeho. Ponahalo ea mochini e hloekile ebile e mosa, 'me mebala e boreleli ebile e khahlisa mahlo. Hape ke phello e kholo ea pono ho Profinseng ea Production. Khamphani ea rona e na le sehlopha se phahameng sa theknoloji, setsebi sa manganga aletrasoc oletting; e phethahetseng ebile e le mafolofolo kamora - Tšebeletso ea thekiso, ho u thusa ho rarollaMathata a Thata Ho potoloha Oache

    Ho tsamaisa Matla a Ultrasonic Ho sebelisa melaoana ea Matla a Matla a Matla a Matla a Matla a Maqolo a Paranetic lipakeng tsa methapo ea pele ho nka nako ea nako ea ho nka nako ea nako ea nako. Re ka sebelisa piezoelecright efe kapa efe ea hau ea piezotic

    Re sebelisitse mokhoa o sireletsehileng, ka botlalo - Ts'ebetso ea kahare ea Sekhachane e lebisang ho khetha mmuso le li-setting tse itseng bakeng sa transtrasocr e itseng ea ultrasonic e itseng.

    Litopo tsa rona tsa matla a 'mele li na le matla a rona a boreleli le taolo ea ho fetola matla. Re fokotsa boleng bo phahameng ba matla a moroalo, a hlahellang a Traduser le ho hlahisoa ke lipehelo tsa piezockics ho qoba tšenyo ea Trage. Re kenyeletsa le ho feta, khuts'oane - potoloho, ts'ireletso ea hona joale le e fetang - Ts'ireletso ea Voltage ho Tsamaiso ea Ts'ebetso le Ho Tšepahala.

    Hobaneng ha rps - jenic jenere ea mora oa mora:

    1. Matla ka 'ngoe a tla lekoa keHlakisaTrarcuser.

    2. Li-Gererator tsohle tsa Wherranty.

    3. E ngotsoe ka matla a phahameng ulesonic ha e na lilemo tse fetang leshome

    4. E 'ngoe le e' ngoe ea Deassith Deshours.

    5. Ho paka hamonate, ha ho na bothata ba ho paka lilemong tse 10 tse romellang khoebo.

    6. Moreki e mong le e mong o tla fumana rekoto ea theko mme ho na le melemo e itseng kamora ho bokella

    Phapang ke efe lipakeng tsa phepelo ea motlakase ea "Digital Ulttrasonic ea motlakase oa" Digital Ulttrasonic ea motlakase oa "Digital Ulttrasonic

    1) Litekanyetso tsohle tsa bohlokoa tsa phepelo e bohlale ea 'mele ea lentsoe la lentsoe la sehlohlolong e ka nkoa ka nepo. Ho joalo ka khafetsa, karolo ea ts'ireletso, hangata ho tšoaroa ke maemo a matla a ho sebetsa, ho sebetsa le ho tiisa likarolo tse fapaneng. Ts'ebetso e tsoelang pele e le tlasa matla, motsamaisi a ke ke a hlahisa mocheso, le sesebelisoa sa matla a phepelo ea motlakase se ke ke sa hlahisa mocheso. Ka hona, katleho e sebetsang ea phepelo ea motlakase e bohlale e phahameng haholo.3) Serware ea Matla ea Sechaba ea Ultrasonic ea Ultrasonic Bakeng sa matla a fapaneng a matla a matla a matla a matla a holimo Ka hona, sehlahisoa sa Matla a Bolokang Matla a Sesole sa Ultrasona le ho ts'epahala ho hooa, le ho lekola bofokoli ba 'mele o ikemetseng oa matla .5) Ho imeloa le ho chesoa ha transucer e ka sireletsoa hanghang le ho tšoha haholo.

    28KhzPiezoelectric Ultrasonic Power Generator High Frequency 0

  • E fetileng:
  • E 'ngoe:
  • E fetileng:
  • E 'ngoe:

    • Q1.Kute ea mofuta oa Horn?

    A. Titanium alloy, re boetse re etselitsoe aluminium hom bakeng sa moreki pele.

    Q2.Ke nako ea ho tsamaisoa?

    A. Bakeng sa KHAOLO EA INSIAL, matsatsi a 3, bakeng sa ho hlophisoa ho hlophisoa matsatsi a 7 a mosebetsi.

    Q3.Does Ultrasocction ea ultrasoc e hloka hore kenyelletso ea catalyst ea lik'hemik'hale?

    K. Che. Empa nako e 'ngoe e hloka ho ts'oana.

    Q4.CAN Sesebelisoa se sebetsa hantle?

    K. Ee, e ka sebetsa ka mor'apereserise ka nako e telele.

    Q5.Ke feela bokhoni ba lisebelisoa bo le bong ba ho tlosa lisebelisoa tse ling?

    A. Makhotla a fapaneng a Hor Horm ea Ts'ebetso, Bakeng sa 2000w Quenic Sequloana Horm Ho sebetsana le 2l ~ 10lmin.

    Q6. Whereti ea lisebelisoa tsa hau tsa morara ea hau?

    A. Lisebelisoa tsohle selemo se le seng.

  • Potoloho ea Ultrasonic Welding Center
    • SehlahisoaMekhahlelo

    Tlohela molaetsa oa hau

    Otla enter ho ea batla kapa esc ho koala