I-Ultrasonic Welding uphondo

Umgangatho ophezulu we-TC4 15khz Tibitanium welding uphondo lwe-ultrasonic weltrasonic weltras

High Quality TC4 15khz Titanium welding horn for ultrasonic welding

Inkcazo emfutshane:

Inkcazo emfutshane:

I-Ultrasonic Horn ngamacandelo aphambili yinkqubo yeWeltrasonic yeWeltrasonic, izixhobo zehowd zibandakanya i-titanium, ialuminiyam kunye nentsimbi. I-Aluminium Alloy Hern yeyona tyhefu.


  • Izixhobo:I-titanium alloy
  • Rhoqo:20kz
  • Ubungakanani:I-330 * 20mm
  • Qhagamshela isikere:1/2 - 20unf

      • Iinkcukacha zemveliso
      FAQ
      Iimpawu zeMveliso

      Umgangatho ophezulu we-TC4 15khz Tibitanium welding uphondo lwe-ultrasonic weltrasonic weltras

      KUTHANDIWEYO I-Titanium ye-Ultrasonic Hern?

      Inkcazo ye-TC4 TitatiumUbukhuluEmva kwesisombululo esiqinileyo someleza ukuphathwa kwempahla ye-TC4, amandla ayonyuka kakhulu, eyi-1100MPA, kunye namandla ngokubanzi angama-900MPA kwi-asned State.

      Ukwanda kwe-thermalI-TC4 Tittium Alo Allotium inoluhlu lweenkonzo ezifana nokuchasana nokunganyangeka okugqibeleleyo, ukuxinana okuphezulu, amandla aphezulu, ubuchule obuhle kunye nokungasebenzi kakuhle.

      Iipropathi zoomatshiniAmandla amanxuwaukwakhiwa kweekhemikhaliI-TC4 iqulethe ibhalansi ye-titanium (Ti), intsimbi (Fe) 0.20, i-witdogen (i-ndrogen (0).

      ukuxinana4.5 (G / CM3) Iqondo lokusebenza - I-100 ~ 550 (° C)

      Ukuqhubela phambili kwe-thermalUkuqhubela phambili kwe-thermal yi-1/5 yentsimbi kunye ne-1/10 ye-aluminium. Ukuqhubela kwe-TC4 yi-1 = 7.955W / MK.

      I-Titanium Alo Allowy TC4 yeyona nto ibaluleke kakhulu elula yokwakha izibane, enexabiso elibaluleke kakhulu kunye namathemba okusebenza kwesicelo kwimimandla ye-petroleum, inqwelo moya, ubunjineli bezithuthi, amanye amasimi.

      Iparameter:

      Nceda ujonge ubukhulu behonjini ngolu hlobo lulandelayo:

      I-15k uphondoIntsimbiI-aluminium alloyI-titanium alloy
      Ubude (mm)Ububanzi (mm)Ubude (mm)Ububanzi (mm)Ubude (mm)Ububanzi (mm)
      9012 - 307012 - 307020 - 30
      I-12012 - 308012 - 309020 - 30
      15512 - 309012 - 3015520 - 30
      I-21020 - 30I-12015 - 30I-18020 - 30
      27020 - 30I-16015 - 30I-21020 - 30
      32020 - 30I-21015 - 3027020 - 30
      27015 - 30
      32015 - 30
      I-35015 - 30
      I-15k isangqa gornIntsimbiI-aluminium alloyI-titanium alloy
      ububanziububanziububanzi
      303030
      505050
      656565
      7575
      8585
      9090
      I-20KITGEXLE HRNIntsimbiI-aluminium alloyI-titanium alloy
      Ubude (mm)Ububanzi (mm)Ubude (mm)Ububanzi (mm)Ubude (mm)Ububanzi (mm)
      5015 - I-2550I-10 - 2590I-10 - 25
      6015 - I-2555I-10 - 2595I-10 - 25
      6515 - I-2560I-10 - 25I-100I-10 - 25
      7015 - I-2570I-10 - 25115I-10 - 25
      9015 - I-2590I-10 - 25I-120I-10 - 25
      9515 - I-2595I-10 - 25I-140I-10 - 25
      11515 - I-2511515 - I-25I-160I-10 - 25
      15515 - I-2517515 - I-25175I-10 - 25
      17515 - I-2520015 - I-25200I-10 - 25
      20015 - I-25I-21015 - I-25I-210I-10 - 25
      I-21015 - I-2527015 - I-25270I-10 - 25
      27015 - I-25I-30015 - I-25I-300I-10 - 25
      I-20K Blawula HernintsimbiI-aluminium alloyI-titanium alloy
      ububanziububanziububanzi
      302020
      353535
      404040
      454545
      505050
      545454
      656565
      75

      Izinto eziphambili ze-uphonsoning ye-Ultrasonic Philn ye-Ultrasonic Witrn: Indlela yokuNgqinelana ye-Ultrasonic Weltrasoning Widlning Wilnment ye-Ultrason ifuna ukuba yi-Amermoning Pointations kwaye ihlasele uxinzelelo lwangaphakathi. Ixabiso elincinci, elingcono. Imeko eguqukayo ichaphazela ubomi kunye nobuchule bokwenza i-weltramonic weltrasning uphondo, kwaye iya kubangela ukonakala okukhulu kwinkqubo ye-ultrasonic. Ke ngoko, kubaluleke kakhulu ukufumanisa ukuba ingaba imeko ye-iltrasonic yelfrason uphondo iqhelekileyo. Kwixa elidlulileyo, ukucwangciswa kunye nokwenza imveliso yeempondo ze-woltrasnic zeltrasonic zelding kwakusekwe kumava, kwaye umgangatho wendalo wagwetywa. Ukongeza kuhlalutyo lwexabiso le-Ammeter kunye ne-Voltmeter kwi-Horn Jonga, imeko ebonakalayo ye-Ultrasonic ye-Ultrasonic yalinganiswa ikakhulu ngesandla. Amava aqokelelweyo kwixesha elifanelekileyo lexesha kufuneka ukuba kuchongwe ngokuchanekileyo, ke uvavanyo lwe-vibel State State kufuneka lusekwe kwidatha yesixhobo kwaye lungenwe luvavanyo lwezandla. I-Ultrasonic Welding uphondo

      Uvavanyo lokuhambahamba kunye nocalucalulo lwendlela yovavanyo lomatshini wokujonga ukuba i-Roqued (F) Ixabiso langoku ...a> kunye nexabiso le-voltage linexabiso le-Ultrason Moson; Xa i-frequency ayikho kuluhlu oluchaziweyo kwiimpawu zombane zezabe ze-ultrasonic zinokwahluka. Oko kukuthi, xa i-ultrasosonic ye-ultrasonic ayikho rhoqo kwindanda esemgangathweni, ukwamkelwa kwayo akuthethi ukuba isenokugcina indawo kuluhlu oluqhelekileyo. Jonga ukuba ngaba i-voltage yangoku kunye ne-voltage ye-Ultrasonic ye-Ultrasonic ye-Ultrasonic iPulmar. Ipulse ibonisa ukuba i-Ultrasonic Weltrasning Holn inzima ukuvinjwa, oko kuthetha ukuba i-Ultrasonic Weltrasning Holn inomgangatho obonakalayo ophucukileyo. Umhlalutyi wezonyango Fumana ukuba ngaba i-waveform ye-quarnesion ye-Ultrasonic ye-Ultrasonic iqhelekile, nokuba kukho i-racquency ye-frequency, nokuba kukho i-wondramonic ye-worequed, kwaye i-wortramonic ye-Ultran isondele kwi-frequency.

      Kutheni i-RPS - Sonic uphondo:

      I-1. Zonke iiphondo ziya kwenziwe yinkqubo ye-fea, ukuze kuqinisekisweUkuphela kobuso bophondo lwe-ultrasonic uphondo olunemikhosi efanayo

      2. Zonke iimpondo ze-ultrasonic kunye neenyanga ezintathu zewaranti.

      I-3. Ikhethiwe kumandla aphezulu e-Ultrasonic ngaphezulu kweminyaka elishumi

      I-4. Yonke i-ultrasosonic hornwith 24hours despeaures ngaphambi kokuba ithunyelwe.

      5. Ukupakisha okuhle, akukho ngxaki yokupakisha kwiminyaka eli-10 yokuthumela ishishini.

      6. Bonke abathengi baya kufumana iirekhodi zokuthenga kwaye kukho umvuzo othile emva kokuqokelelwa

      Inkonzo kunye nokuHanjiswa

      • Iwaranti ngonyaka ukuba i-transduvercer.
      • Ungaqhagamshelana nathi malunga nophando lobugcisa nangaliphi na ixesha.
      • Sinikezela ngenkonzo ye-OEM yoTyelelo wangasevesti, iya kugcina imfihlo yabathengi bethu.
      • Sinikezela ngenkonzo yemveliso eyenzelwe ngokwezifiso ngenani elincinci kwakhona.
      • Ukuhanjiswa ngoFend - I-Ex / DHL / UPS / TNT

      Low DensityTitanium Welding Horn High Specific StrengthTC4 0

    • Ngaphambili:
    • Okulandelayo:
    • Ngaphambili:
    • Okulandelayo:

      • I-Q1. zeziphi izinto ezinobulumko zophondo?

      A. Tittanium Allouny, SIYAMDLALI WOKUGQIBELA I-ALMMUM HOM YOKUGQIBELA.

      I-Q2.Liphi ixesha lokuHanjiswa?

      A. I-HOM eqhelekileyo, iintsuku ezi-3, kwiintsuku ezisi-7 zomsebenzi ezi-7 zomsebenzi.

      I-Q3.Desios Eltrasonic ikwafuna ukongezwa kwekhemikhali?

      A. hayi. Kodwa ixesha elithile lifuna indlela yokuzinza.

      Q4.Can Isixhobo siyasebenza rhoqo?

      A. Ewe, inokusebenza rhoqo ngeendawo ezihlala kuzo.

      Q5. YINTONI INKCAZO YOKUQHUTYWA KOKUSETYENZISWA KWEZOBUCHULE?

      A. Isakhono esahlukileyo sokuqhubeka kweHore, i-2000w I-Subline Horm inokuthi isebenze 2l ~ 10lmin.

      Q6. YINTONI IXESHA LEZIFUNDO ZAKHO?

      A. Zonke izixhobo zinewaranti enye yonyaka.

    • I-Ultrasonic Horn
    • Uyilo lwe-ultrasonic uphondo
    • Isoftware yoyilo lwe-Ultrasonic Hold
    • I-Ultrasonic Translacer
    • I-Ultrasonic Transorcer Horn
    • I-Ultrasosonic Weltrasoning Yilondolozi
    • I-Ultrasonic Welding Prons
    • umatshini we-woltrasonic welding
      • ImvelisoIindidi

      Shiya umyalezo wakho

      Hit faka ukhangela okanye i-ESC ukuvala