Sistimi ea Welltrasonic ea Ultrasonic bakeng sa ho qosoa ha mokotla oa mokotla
1. Molao-motheo oa Bohlale
Phetoho ea Matla
JESolo ea Ultrasonic e Fetolela Matla a Motlakase ho Phahamisa Thabo 'me a ba fetisetsoa lenaleng ka Transworr.
Thibelo e qhibiliha
Matla a Vibration a tsepamisitsoe ka holim'a sekoaelo le sekoaelo (joalo ka PP, Peōana (ea rutehileng haholo
Khatello ea khatello
Sesebelisoa se hlorisoang ke khatello ea litheolelo (hangata 10 - 50n / cm²), 'me tiiso e se nang letho e thehoa kamora ho fola.
2.Parameter
| Lintho | Mefuta | LITLHAKISO TSE KHOLO |
|---|---|---|
| Khafetsa | 20Khz | Boitsebiso bo boima ba thepa, sebaka sa Soding |
| Ampludeture | 15 - 50 μM | Ntlha ea lintho tse bonahalang, ho thata |
| Nako ea ho phomola | 0.1 - 1.5s | Lintho tse bonahalang tse futhumetseng tsa boitšoaro le litlhokahalo tsa matla |
| Khatello | 10 - 100 n / cm² | Lintho tse ling tse makatsang, boqapi bo boima |
| Matla a tjeke (preload) | 5 - 20 n | Etsa bonnete ba ho kopana ha qala |
3. Ho feto-fetoha le maemo
Lisebelisoa tse sebetsang
Pppolastics: pp (polyproplene), pe (polyethylene), Pet (polyester), jj.
Lisebelisoa tsa ho kopanya: Ho netefatsa hore lintlha tse qhibilihang tsa thepa e 'ngoe le e' ngoe ea lisebelisoa li tšoana (joalo ka aluminium - filimi ea polasetiki e hloka kalafo e khethehileng)
Lisebelisoa tse thibetsoeng
Thermossetting (joalo ka ha Epoxy Remin), TPU (e hloka ts'ebetso e khethehileng), phahameng -
4. Linyeoe tsa kopo ea indasteri
Ho tsamaisa metsi
Yoghile Cury Lid (PP Mahala
Setifikeiti sa leholimo se fetotsoeng ('mapa)
Sebaka sa phapanyetsano ea nama ea nama: Amplute e tlase (20μm) ho holisa nako ea ho phomola (1.2s) ho netefatsa maemo a mafura a gase.
Mokotla o phahameng oa mocheso
Sebelisa hele ea khalase e matlafalitsoeng e matlafalitsoeng, khatiso ea mocheso> 150 ℃, kopana le litlhoko tsa 121 ℃ / 30min
Q1.Kute ea mofuta oa Horn?
A. Titanium alloy, re boetse re etselitsoe aluminium hom bakeng sa moreki pele.
Q2.Ke nako ea ho tsamaisoa?
A. Bakeng sa KHAOLO E KHOLO, matsatsi a 3, bakeng sa Hom 7 - Matsatsi a 14 a ho sebetsa.
Q3.CAN sesebelisoa sa sesebelisoa se sa tsoetseng pele?
K. Ee, e ka sebetsa ka mor'apereserise ka nako e telele.
Q4. Wheretithara ea lisebelisoa tsa hau tsa Welding ea hau?
A. Lisebelisoa tsohle selemo se le seng.
-
20Khz tloaelo ea ho hlophisoa ha mochine oa Ultrasonic welling polasetiki
-
Laboratori 28Khz Ultrasonic Sonicator homogenizers le Titanium Horn
-
Rinco o ile a fetola lenaka la ho palama Horn a khomaretsoeng lenaka la ABS le Acryliclip
-
Titanium Alilon Expontial Ultrasonic Welding Horns
-
Mochini oa Ultrasoc o Lahala ka Rotary ANVILS LE HONK ea Rotha bakeng sa ho araba le ho tiisa taba
-
120kHz desktop ultrasonic spray coating machine lipompo tse peli bakeng sa phepelo ea metsi