Featured Products

305mm 20Khz Ultrasonic Cutting Blades With Digital Generator

short description:

short description:



Product Detail

FAQ

Product Tags

305mm 20Khz Ultrasonic Cutting Blades With Digital Generator

Description

Frequency:20khzMaterial:Titumium
Cutting Hight:86mmCutting Width:305mm
Applcation:Ultrasonic Food Cutting
High Light:

ultrasonic cutting tool

,

ultrasonic slitting machine

305mm 20Khz Ultrasonic Cutting Blades With Digital Generator

Parameter

MachineUltrasonic cake Cutter
Frequency(KHz)20Khz
Power1000 W
Cutting Blade / HornTitanium
Voltage(V)220V
The width of bladedepend on your requirement
Cutting thickness86mm in max
Horn amplitude10-40μm
Equipment weight1KG

What’s the principle of ultrasonic cutting?

RPS-SONIC offers high quality ultrasonic food cutting components, including ultrasonic generators, transducers, guillotines and slitters.

Ultrasonic food cutter Ultrasonic drive power converts the mains electricity into high frequency and high voltage AC current, which is output to the ultrasonic transducer. The transducer is actually equivalent to an energy conversion device, which can convert the input electrical energy into mechanical energy, namely ultrasound. Its manifestation is that the transducer stretches back and forth in the longitudinal direction. The frequency of the telescopic movement is equal to the frequency of the high-frequency alternating current supplied by the driving power supply. The function of the horn is to fix the entire ultrasonic vibration system, and the other is to amplify the output amplitude of the transducer. On the one hand, the cutting knife (tool head) further amplifies the amplitude and focuses the ultrasound. On the other hand, it outputs ultrasonic waves, and uses the similar cutting edge of the cutting knife to concentrate the ultrasonic energy into the cutting part of the material to be cut. Under the action of huge ultrasonic energy, this part instantly softens and melts, and its strength decreases. At this point, as long as a small cutting force is applied, the purpose of cutting the material can be achieved.
The basic requirements of ultrasonic cutting tools for tool materials. In the cutting process, the cutting part of the tool must not only withstand a large cutting force, but also withstand the high temperature generated by chip deformation and friction. To maintain the cutting ability of the tool, the tool should have the following cutting performance. 1. High hardness and wear resistance The hardness of the tool material must be higher than the hardness of the workpiece material. Generally, it should be above HRC60 at room temperature. Generally speaking, the higher the hardness of the tool material, the better the wear resistance. 2. Sufficient strength and toughness The cutting part of the tool has to withstand great cutting force and impact. Therefore, the tool material must have sufficient strength and toughness. Simple operation and high use value highlight your pursuit of high quality.

 

微信图片_20191213135845


  • Previous:
  • Next:


  • Previous:
  • Next:
  • Q1.What kind material of the horn?

    A. Titanium alloy, we also customized aluminum hom for customer before.

    Q2.What’s the time of delivery?

    A. For Conventional hom, 3 days, for customized hom 7 work days.

    Q3.Does ultrasonic extraction also require the addition of a chemical catalyst?

    A. No . but some time need Mechanical stiring.

    Q4.Can the device work continously?

    A. Yes ,it can work 24hours continously.

    Q5.What’s the Processing capacity of one set ultrasonic extraction equipment?

    A. Different hor different Processing capacity, for 2000W Nine section whip horm can dealing 2L~10Lmin.

    Q6.What’s the warranty of your sonicator equipment?

    A. All equipment one year warranty.

  • Ultrasonic Cutter For Plastics
  • Ultrasonic Cutting Machine
  • Ultrasonic Cutting Plastic
  • Ultrasonic Cutting Tools
  • Leave Your Message