Clean Edge Ultrasonic Cutting Machine Polyester Fabric Blade Replaceable

Clean Edge Ultrasonic Cutting Machine Polyester Fabric Blade Replaceable

Parameter

Introduction

Basic structure and characteristics

Ultrasonic cutting machine is a type of equipment that uses wave energy for cutting processing. It is characterized by cutting without edge. In other words, there is no need for a traditional cutting edge. Traditional cutting uses a knife with a sharp edge to press the material to be cut. This pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear strength of the material being cut, and the molecular binding of the material is pulled apart and cut off. Because the material is pulled apart by strong pressure, the cutting edge of the cutting tool should be very sharp, and the material itself must withstand relatively large pressure. It is not good for cutting soft and elastic materials, and it is more difficult for viscous materials.

Product Application

The ultrasonic cutting machine can used for cutting different products like fiber ,paper , food ,fabric ,plastic etc . This machine is with 30KHz ultrasonic hand cutter knife .It can used for hand cutting , CNC cutting or Robot hold cutting .

1)  Natural Fiber
2)  Synthetic Fiber
3) Thin plastic products,such as plastic film,mobile phone shell
4)  Paper
5)  Film
6)  Rubber,Silica Gel
7)  Repair of copper foil on PCB
8)  ABS,PP,PE etc organic plastics
9)Sheet with thickness no more than 2mm
10)Polyester Fabric
11) Food 

Main Features 

1) With German circuit ultrasonic generator ,Auto. tuning 300W-900W available

2) Clean cutting 

3) A press of the trigger switch button

4) Overload protect

5) Easy operation ,small volume and portable design 

6) The cutting unit could be installed on auto. production lines 

7) Standard cable length :3 M .