Ultrasonic na-ekpuchi igwe mkpuchi

Aticatonization na-akpaghị aka nke ọma igwe na-agbacha igwe bụ nhọrọ kachasị mma maka mkpuchi mkpuchi

Fully automatic ultrasonic atomization spray machine is the most efficient choice for photoresist coating

Nkọwa mkpụmkpụ:

Ultrasonic Springing bụ akụrụngwa spraying maka mmepụta nke iko, gị dị gịrịgeụ, ọnụego mgbakọ dị ala, na-acha ọcha), na-agbakọta atomized, na kpo oku n'ịntanetị. E jiri ya tụnyere ụzọ spraying usoro ọdịnala dị ka elu - spraying akụrụngwa nwere ike ijikwa ọsọ na-agafe, ma ọ nweghị ihe tọgbọ chakoo n'oge sputter n'oge sputter. Ngwọta eji arụ ọrụ bụ> 95%, nke na-ebelata ego imepụta ma na -ebelata mmetọ gburugburu ebe obibi.
    Nkọwa nke ngwaahịa
    Ajụjụ
    Mkpado Ngwaahịa

    Paramater

    Ihe Paramita
    Mgbe na mgbe 40khz
    Ike 10 ~ 100w
    Ọnụego asọmpi (ml / min) 0 ~ 20ml / min
    Spray obosara 2 ~ 200mm
    Ngwọta Iji dị elu karịa 98%

     

    Nkowa

    Thekpụrụ ọrụ nke atotination atọ na-arụ ọrụ na teknụzụ atọm, nke a atommes na-eme ka mmiri dị elu site na gas gas ka ọ bụrụ ihe mkpuchi ma ọ bụ ihe nkiri. Mytrasonic na -acha nke atom na ultrasonization nozu, ihe na-eweta ultrasonic, usoro na-enye mmiri, sistemụ kpo oku, sistemụ kpo oku, na sistemu eji eme ihe. Akụkụ ya bụ ultrasonic no ultrasonic nozuela, na-emegharị ihe na-eme ugboro ugboro site na transducectric ebili mmiri na-enweghị isi. Mgbe ọnọdụ dị oke egwu, ihe nkiri mmiri ahụ ga-agbaji na Uniform micron - nke ahịhịa amị.

    Ultrasonic a na-agbasa usoro ultrasonic bụ usoro a na-eme ngwa agha nke na-eme ihe eji eme ihe na-eme ka usoro ultrasonic, usoro mmiri, na-esite na ultrasonic na Teklonic Technost na-eme. E jiri ya tụnyere ikuku ikuku abụọ - mmiri na-agbasa, ultrasonic na-agbasa nwere ike iweta otu otu dị elu, dị gịrị dị gịrịgịrị mkpuchi na nkenke. N'otu oge ahụ, ebe ọ bụ na nsogbu ultrasonic anaghị achọ enyemaka ikuku iji na-eme nke ọma, ndị na-eme ihe ọsọ ọsọ na-eme ka njikwa ya na-adabere na mkpụrụ kama ịba ụba site na mkpụrụ. Ya mere, ultrasonic spraying nwere ike belata obere agba ahụ kpatara site na usoro spraying, si otú a na -ebelata mkpocha agba. Ọnụ ọgụgụ agba agba nke ultrasonic na-agbasa ihe karịrị ugboro anọ nke ọdịnala abụọ - mmiri na-agba.

    EGO

    1. Udiri dị elu: ịgbatị mmiri ultrasonic nwere ike imepụta ihe na-emepụta atọ na otu ihe karịrị 95% 1.
    2. Ngwa mgbakwunye dị elu: Ebe ọ bụ na ikuku ultrasonic anaghị achọ enyemaka ikuku, na-ebelata na mkpofu ihe karịrị ugboro anọ nke ọdịnala abụọ - mmiri na-agbasa.
    3. Adị elu dị elu: spraying spraying nwere ike inye nkenke elu na mkpuchi mkpuchi dị elu.
    4. Belata crogging: ultrasonic spraying adịghị mfe clog na-enweghị atụ, ma nwee ike ijikwa nkenke dị elu.


    Ojiji nke ultrasonics atomization spraying na-agụnye akụkụ ndị a:

    1. Ọgwụgwụ elu: Ultrasonic na-eme ka igwe dị iche iche sie ike, rọba, iko, with, iko, with, wdg.

    2. Usoro usoro ọgwụgwọ na-etolite: atominizations pọmpụ ultrasoning spraying igwe nwere ike ijikwa ịgba ahụ na-enweghị isi ma dịkwa mma maka spraying dị iche iche. Uzo ya, micron - mkpuchi buru ibu na-enye ohere ịkpụzi ịgba akwụkwọ maka ngwa zuru oke.

    3. Belata oge dị nso: N'okpuru usoro mmepụta ihe, atọm ultrasonic na-efesa igwe nwere ike belata ma melite arụmọrụ arụpụta. Ya Ultra - ọnụego dị ala na mpịakọta nke ukwuu na-eme ka ịgbapụta spraying kasị ntụkwasị obi ma rụọ ọrụ nke ọma.

    4. Nkwụghachi ego na-efu: n'ihi na ultrasonic na-ebelata agba na-agbada na mkpofu, ọ na-eme ka ọfụma na-eme ihe karịrị ugboro anọ nke usoro spraying. Ke adianade do, ultrasonic mmtrasonization spraying igwe nwere ike oriri ike na ogo atomization, na-ebelata ụgwọ ọrụ.

    5. Uru nchedo gburugburu: atotization na-emepụta ihe na-emepụta ihe ọ bụla na mmetọ ikuku, na-ezute ihe ndị chọrọ gburugburu gburugburu ebe obibi
  • Nke gara aga:
  • Osote:
    • Ihe emeputara ohuruedemede

    Hapụ Ozi Gị

    See ịbanye na ọchụchọ ma ọ bụ ESC imechi