Ultrasonic na-ekpuchi igwe mkpuchi

50khz akpaka akpaka ultrasonic igwe mkpuchi

50KHz automatic ultrasonic spray coating machine

Nkọwa mkpụmkpụ:

Ultrasonic Springing bụ akụrụngwa spraying maka mmepụta nke iko, gị dị gịrịgeụ, ọnụego mgbakọ dị ala, na-acha ọcha), na-agbakọta atomized, na kpo oku n'ịntanetị. E jiri ya tụnyere ụzọ spraying usoro ọdịnala dị ka elu - spraying akụrụngwa nwere ike ijikwa ọsọ na-agafe, ma ọ nweghị ihe tọgbọ chakoo n'oge sputter n'oge sputter. Ngwọta eji arụ ọrụ bụ> 95%, nke na-ebelata ego imepụta ma na -ebelata mmetọ gburugburu ebe obibi.
    Nkọwa nke ngwaahịa
    Ajụjụ
    Mkpado Ngwaahịa

    Paramater

    Ugboro (khz)

    40khz

    50kHz

    60Khz

    100Khz

    120Khz

    Generator ihe nlereanya

    HF010

    HF010

    HF010

    HF010

    HF010

    Ntinye voltaji

    220V/50Hz

    220V/50Hz

    220V/50Hz

    220V/50Hz

    220V/50Hz

    ịgba nozulu ihe

    Titanium alloy

    Titanium alloy

    Titanium alloy

    Titanium alloy

    Titanium alloy

    Shell ihe

    Igwe anaghị agba nchara

    Igwe anaghị agba nchara

    Igwe anaghị agba nchara

    Igwe anaghị agba nchara

    Igwe anaghị agba nchara

    Nkwukọrịta ọdụ ụgbọ mmiri na RS485

    DB15

    DB15

    DB15

    DB15

    DB15

    mkpuchi obosara

    10-50mm

    10-40mm

    10-35mm

    2 ~ 10 mm

    2-8 mm

    mkpuchi urughuru nha

    15-40 UM

    10-30 um

    10-20um

    5-15 um

    1 ~ 10 um

    Ihe achọrọ viscosity ihe

    <100cps

    <90cps

    <80cps

    <50cps

    <50cps

    ọdịnaya siri ike

    <10%

    <10%

    <10%

    <10%

    <10%

    Ultrasonic ike

    100W , 10 ~ 90%

    100W , 10 ~ 90%

    100W , 10 ~ 90%

    100W , 10 ~ 90%

    100W , 10 ~ 90%

    viscosity mmiri dị na mpụga chọrọ

    n100cps

    < 100cps

    < 100cps

    < 100cps

    < 100cps

    mkpuchi eruba ikike

    <40ml/min

    <30ml/min

    <15ml/min

    <7ml/min

    <5ml/min

    Dayameta oghere

    0.3-1.5mm

    0.3-1 mm

    0.3-1 mm

    0.3-0.8mm

    0.3-0.5mm

     

    Nkowa

    Thekpụrụ ọrụ nke atotination atọ na-arụ ọrụ na teknụzụ atọm, nke a atommes na-eme ka mmiri dị elu site na gas gas ka ọ bụrụ ihe mkpuchi ma ọ bụ ihe nkiri. Mytrasonic na -acha nke atom na ultrasonization nozu, ihe na-eweta ultrasonic, usoro na-enye mmiri, sistemụ kpo oku, sistemụ kpo oku, na sistemu eji eme ihe. Akụkụ ya bụ ultrasonic no ultrasonic nozuela, na-emegharị ihe na-eme ugboro ugboro site na transducectric ebili mmiri na-enweghị isi. Mgbe ọnọdụ dị oke egwu, ihe nkiri mmiri ahụ ga-agbaji na Uniform micron - nke ahịhịa amị.

    Ultrasonic a na-agbasa usoro ultrasonic bụ usoro a na-eme ngwa agha nke na-eme ihe eji eme ihe na-eme ka usoro ultrasonic, usoro mmiri, na-esite na ultrasonic na Teklonic Technost na-eme. E jiri ya tụnyere ikuku ikuku abụọ - mmiri na-agbasa, ultrasonic na-agbasa nwere ike iweta otu otu dị elu, dị gịrị dị gịrịgịrị mkpuchi na nkenke. N'otu oge ahụ, ebe ọ bụ na nsogbu ultrasonic anaghị achọ enyemaka ikuku iji na-eme nke ọma, ndị na-eme ihe ọsọ ọsọ na-eme ka njikwa ya na-adabere na mkpụrụ kama ịba ụba site na mkpụrụ. Ya mere, ultrasonic spraying nwere ike belata obere agba ahụ kpatara site na usoro spraying, si otú a na -ebelata mkpocha agba. Ọnụ ọgụgụ agba agba nke ultrasonic na-agbasa ihe karịrị ugboro anọ nke ọdịnala abụọ - mmiri na-agba.

    EGO

    1. Udiri dị elu: ịgbatị mmiri ultrasonic nwere ike imepụta ihe na-emepụta atọ na otu ihe karịrị 95% 1.
    2. Ngwa mgbakwunye dị elu: Ebe ọ bụ na ikuku ultrasonic anaghị achọ enyemaka ikuku, na-ebelata na mkpofu ihe karịrị ugboro anọ nke ọdịnala abụọ - mmiri na-agbasa.
    3. Adị elu dị elu: spraying spraying nwere ike inye nkenke elu na mkpuchi mkpuchi dị elu.
    4. Belata crogging: ultrasonic spraying adịghị mfe clog na-enweghị atụ, ma nwee ike ijikwa nkenke dị elu.


    Ojiji nke ultrasonics atomization spraying na-agụnye akụkụ ndị a:

    1. Ọgwụgwụ elu: Ultrasonic na-eme ka igwe dị iche iche sie ike, rọba, iko, with, iko, with, wdg.

    2. Usoro usoro ọgwụgwọ na-etolite: atominizations pọmpụ ultrasoning spraying igwe nwere ike ijikwa ịgba ahụ na-enweghị isi ma dịkwa mma maka spraying dị iche iche. Uzo ya, micron - mkpuchi buru ibu na-enye ohere ịkpụzi ịgba akwụkwọ maka ngwa zuru oke.

    3. Belata oge dị nso: N'okpuru usoro mmepụta ihe, atọm ultrasonic na-efesa igwe nwere ike belata ma melite arụmọrụ arụpụta. Ya Ultra - ọnụego dị ala na mpịakọta nke ukwuu na-eme ka ịgbapụta spraying kasị ntụkwasị obi ma rụọ ọrụ nke ọma.

    4. Nkwụghachi ego na-efu: n'ihi na ultrasonic na-ebelata agba na-agbada na mkpofu, ọ na-eme ka ọfụma na-eme ihe karịrị ugboro anọ nke usoro spraying. Ke adianade do, ultrasonic mmtrasonization spraying igwe nwere ike oriri ike na ogo atomization, na-ebelata ụgwọ ọrụ.

    5. Uru nchedo gburugburu: atotization na-emepụta ihe na-emepụta ihe ọ bụla na mmetọ ikuku, na-ezute ihe ndị chọrọ gburugburu gburugburu ebe obibi
  • Nke gara aga:
  • Osote:
  • Ultrasonic nozuzu
  • Ultrasonic spraying akụrụngwa
  • Ultrasonic na-ebunye ya
  • ụlọ ọrụ ụlọ ọrụ Ultrasonic
  • Mmepụta igwe igwe Ultrasonic
  • Ultrasonic spraying ụlọ ọrụ
    • Ihe emeputara ohuruedemede

    Hapụ Ozi Gị

    See ịbanye na ọchụchọ ma ọ bụ ESC imechi