Featured Products

35khz 800w Plastic Ultrasonic Spot Welding Machine

short description:

short description:



Product Detail

FAQ

Product Tags

35khz 800w Plastic Ultrasonic Spot Welding Machine

Description

Frequency:35kHzHorn:Customized
Horn Material:Alumium AlloyGenerator:Digital Generator
Weight:5kg In Totall
High Light:

plastic ultrasonic spot welding machine

,

35khz ultrasonic spot welding machine

,

800w ultrasonic spot welding machine

Compact handheld ultrasonic welding machine for Car interior panel spot welding

Introduction:

Ultrasonic plastic welding machine is a welding equipment developed in the field of plastic welding, the industry is referred to as the ultrasonic plastic welding machine for short. Ultrasonic welding equipment is a high-tech technology for welding cooked plastic products. All kinds of cooked plastic parts can be treated with ultrasonic welding. When welding plastic products, do not add any adhesives, fillers or solvents, nor consume a large amount of heat .It has the advantages of easy operation, fast welding speed, high welding strength and high production efficiency. Therefore, the ultrasonic welding technology is more and more widely used.

Parameter:

ItemParameterAdvantage:Application
28Khz ultrasonic hand welder

Straight type

▪ 28Khz 800W

▪ Digital generator

▪ Horn customized

▪ Aluminum alloy&Steel & Titanium alloy

▪ Power Supply: 220v 50/60HZ

1. light generator ,light hand welder.The generator 120*120*380, whole weight5KG, with generator 4kg, and the 28Khz hand welder 1kg, 35Khz hand welder 0.8kg. Suit for hand operate.

2. Special alloy metal housing, the housing of the hand-welder is light but firm, not easy to be deformed, longer it’d using life.

3. Digital generator, it can tracking the frequency itself, easy for operate. Output /welding time adjustable, suit for both hand operate and machine operate.

PP PVC Fabric woven PE ABS

PS Nylon PU PET All Thermoplastic material, the thickness 8mm in max.

Straight type suit for both hand /machine operate.

Gun type suit for hand operate.

28Khz ultrasonic hand welder

Gun type

35Khz ultrasonic hand welder

Straight type

▪ 35Khz 500W

▪ Digital generator

▪ Horn customized

▪ Aluminum alloy&Steel & Titanium alloy

▪ Power Supply: 220v 50/60HZ

PP PVC Fabric woven PE ABS

PS Nylon PU PET All Thermoplastic material, the thickness 5mm in max.

Straight type suit for both hand /machine operate.

Gun type suit for hand operate.

35Khz ultrasonic hand welder

Gun type

For better application , it is better share all the material information with me, the material, thickness, operate way, speed requirements before order .

We also supply 20Khz 40Khz ultrasonic hand-weld welder.

Working principle

When the ultrasonic wave is applied to the thermoplastic plastic contact surface, it will generate tens of thousands of high-frequency vibrations per second. This kind of high-frequency vibration reaches a certain amplitude. The ultrasonic energy is transmitted to the welding zone through the upper welding piece. The welding interface has a large acoustic resistance, so local high temperatures can occur. Also, due to the poor thermal conductivity of plastics, they could not be released in time and gathered in the welding zone, which caused the contact surfaces of the two plastics to melt rapidly, and after a certain pressure was applied, they were merged into one. When the ultrasound stops working, let the pressure last for a few seconds to make it solidify and form, so that a strong molecular chain is formed to achieve the purpose of welding, and the welding strength can be close to the strength of the raw material. The quality of ultrasonic plastic welding depends on the three factors of the transducer welding horn amplitude, the applied pressure and the welding time. The welding time and the welding horn pressure can be adjusted. The amplitude is determined by the transducer and the horn. There is a suitable value for the interaction of these three quantities. When the energy exceeds the suitable value, the melting amount of the plastic is large, and the welded material is easily deformed; if the energy is small, the welding is not easy, and the applied pressure cannot be too large. This optimal pressure is the product of the edge length of the welded part and the optimal pressure per 1mm of the edge.

Advantages:

This switchable ultrasonic spot welding equipment can freely switch between the two holding methods

Pistol type ultrasonic spot welding machine: The shape is designed according to ergonomics. The ultrasonic start switch is located at the trigger of the pistol, which is convenient for lifting and use. It is especially suitable for horizontal or vertical welding operations.Straight-hold ultrasonic spot welder: The shape is a straight-tube design. The ultrasonic start switch is located on the outside of the straight-tube, which is convenient for hand-held welding and carrying.

35khz 800w Plastic Ultrasonic Spot Welding Machine 0


  • Previous:
  • Next:


  • Previous:
  • Next:
  • Q1.What kind material of the horn?

    A. Titanium alloy, we also customized aluminum hom for customer before.

    Q2.What’s the time of delivery?

    A. For Conventional hom, 3 days, for customized hom 7 work days.

    Q3.Does ultrasonic extraction also require the addition of a chemical catalyst?

    A. No . but some time need Mechanical stiring.

    Q4.Can the device work continously?

    A. Yes ,it can work 24hours continously.

    Q5.What’s the Processing capacity of one set ultrasonic extraction equipment?

    A. Different hor different Processing capacity, for 2000W Nine section whip horm can dealing 2L~10Lmin.

    Q6.What’s the warranty of your sonicator equipment?

    A. All equipment one year warranty.

  • Ultrasonic Spot Welder
  • Leave Your Message