Ultrasonic Degassing Machine

Professional Ultrasonic Water Treatment of cellular structure of the algae

short description:


Product Detail
FAQ
Product Tags

Professional Ultrasonic Water Treatment of cellular structure of the algae

Parameter

Model

RPS-SONO20-2000

RPS-SONO20-3000

Input voltage

220/110V,50/60Hz

Controller

Digital controller with automatic frequency tracking

Rated power(kW)

2.0

3.0

Power adjust

10%-99%

Amplitude

30~80μm

Frequency(kHz)

20±0.5,automatic frequency tracking

Horn material

Titanium alloy

Horn diameter

40~50mm

50mm

Horn length

240~490mm, can be customized

Flange

Tri-clamp/DN50 flange/customized flange

Operating method

Buttons

Working temperature

≤200℃

≤200℃

Working pressure

Working pressure

≤0.4MPa,can be customized

Processing volume

Above 5L

Above 10L

Material viscosity

≤6000cp

≤6000cp

 

Introduction

Water Treatment by Means of Ultrasound
Among the numerous applications of ultrasound, the approach is used in the field of water treatment. In this scenario, forces other than cavitation forces are being used to achieve a certain goal. An example of such ultrasound systems which can be found on the market are the RPS-SONIC sonochemistry systems, which are manufactured to suppress algal growth and biofilm formation.
They do not even come close to reaching cavitation levels. Other mechanical forces induced by the produced mechanical pressure waves are use to suppress algal growth and reduce biofilm growth, such as resonance forces, longitudinal and transversal sound wave forces.

To reach this goal, the RPS-SONIC sonochemistry systems for example use a ‘blend’ of very specific ultrasound frequencies of certain power which are emitted into the water by specific transducers. This will enhance the specificity and selectivity of the ultrasonic treatment. The algae are treated with ultrasonic sound waves set in precise frequencies that directly target the cellular structure of the algae. The amount of algae in the water is reduced and controlled in an efficient, cost-effective manner, and further growth is inhibited. Green layers disappear, biofilm formation is prevented, and the appearance and clarity of the water is visibly improved. The continuous use of such a device prevents the water from becoming polluted again.

These kind of ultrasound algae control systems can be used in all situations where water is stored, from large industrial water applications to small private pools or ornamental ponds. These systems range from large capacity units to small ones, enabling a ‘tailor-made’ solution to all purposes.

The amount of time needed to see improvements depends on parameters, such as the type of the algae present in the algal population, water temperature, the amount of light, the amount of nutrients present (especially phosphate and nitrate), size and depth of the water body, TSS leve

 




  • Previous:
  • Next:
  • Q1.What kind material of the horn?

    A. Titanium alloy, we also customized aluminum hom for customer before.

    Q2.What’s the time of delivery?

    A. For Conventional hom, 3 days, for customized hom 7 work days.

    Q3.Does ultrasonic extraction also require the addition of a chemical catalyst?

    A. No . but some time need Mechanical stiring.

    Q4.Can the device work continously?

    A. Yes ,it can work 24hours continously.

    Q5.What’s the Processing capacity of one set ultrasonic extraction equipment?

    A. Different hor different Processing capacity, for 2000W Nine section whip horm can dealing 2L~10Lmin.

    Q6.What’s the warranty of your sonicator equipment?

    A. All equipment one year warranty.

  • Ultrasonic Degassing And Defoaming Of Liquids
  • Ultrasonic Liquid Processors
  • ultrasonic liquid processor
  • Leave Your Message