Ultrasonic na-emegharị ma na-emegharị

20khz ultrasonic na-adọta ite maka aluminom / ọla kọpa

20kHz Ultrasonic tinning pot for Tinned Aluminum/Copper

Nkọwa mkpụmkpụ:

Ultrasonic na-ahụ n'anya bụ ngwa pụrụ iche nke na-eji elu - ugboro ultrasonic na-enyere aka ịgbado ọkụ. A na-ejikarị ya maka ịgbado ọkụ elektrik, ọkachasị adabara ndị ndu na-agba ọkụ -
    Nkọwa nke ngwaahịa
    Ajụjụ
    Mkpado Ngwaahịa
    Paramita
    Ihe nlere anya no Rps - UTP2
    Ultrasonic Ultrasonic 20khz
    Mmepụta kachasị 1000 watt
    Okpomọnọ 150 ~ 400 Celsius C
    Ịnye ọkụ 220V / 50 - 60 Hz
    Ultrasonic jenerato Saiz 250 (w) x 310 (L) x 135 (h) mm
    Aro 5 n'arọ
    Mma Ultrasonic na-agbanwe agbanwe
    Mbido akụkụ 20 * 15cm
    Odiri Matrial Iko ii, al, mo, cu wdg.,


    1. Colekpụrụ
    Ultrasonic Vimbonic: Na-eweta ultrasonic (na-abụkarị ugboro 20khz - na-ebugharị mmiri igwe na-agbanwe agbanwe, na-eweta ihe dị elu - Ngwunye okwu.
    Selitation mmetụta cavitation: ebili mmiri ultrasonic na-eme ka obere egosipụta na ọnya mmiri na-awụ akpata oyi n'ahụ, na-eme ka ọ dị ukwuu na-agbado ọkụ.
    Tinning pot.png
    2. Onye isi ihe
    TIN ịsa ahụ: akpa dị elu nke igwe na-eguzogide (dịka Titanium Alloy) nke na-ejide egwu (200 Celsius) na njikwa okpomọkụ (200 Celsius: 450 Celsius C).

    Usoro Ultrasonic:
    Transducer: Tonventọgharị akara eletriki n'ime usoro eji eme ihe.
    Amplifier: acclifies na-atụ ụjọ ma na-ebunye ya mmiri mmiri.
    Sistemụ ọkụ na-ekpo ọkụ: Eletriki ọkụ ma ọ bụ akwa seramiiki ka ị nọgide na-enwe ọnọdụ steeti Solder Solder.
    Usoro nchịkwa: PID PIVIPL Control module, mgbanwe ike ultrasonic, ọrụ oge, wdg.

    3. Ọrụ
    3.1 Preheating: Okpomọkụ sodder ruo na setịpụrụ okpomọkụ (dịka 250 Celsius C).
    3.2 Ultrasonic Activation: Bido ebili mmiri ultrasonic, na elu nke mmiri mmiri nke tin mmiri ga-ama jijiji.
    3.3 Seender: na-emikpu ihe ọ bụla ka a ga-agbaze (dị ka PCB Board ma ọ bụ ọdụ ụgbọ mmiri) na mmiri mmiri, a na-agbaji oyi akwa ngwa ngwa.
    3.4 Mmecha: Wepụ worpoyer na-etolite nkwonkwo sorder.


    4. Njirimara teknuzu
    4.1 Enweghị flux chọrọ: ebili mmiri ultrasonic nwere ike iwepu oyi akwa, belata nsị kemịkalụ, ma nwee gburugburu ebe obibi - ịchekwa.
    4.2 Adabere na ihe siri ike - na ihe ndị siri ike - IWO ihe: Ọ nwere mmetụta dị ukwuu na akụrụngwa ndị siri ike weld ọdịnala, dịka aluminom, igwe anaghị agba nchara, na caramics.
    4.3 Adddic na-agba aja aja: Kwesịrị ekwesị maka elu - Chọrọ ihe nlere dị ka micro - Pitch patches (dịka patches) na elu - ahịrị ugboro ugboro.
    4.4 Okpomoku nke okpomoku: di omimi nke mmiri mmiri na-ezere ebe obibi obodo ma na --ebelata ihe ọkụkụ.


    5. Ngwa ndị a na-ahụkarị
    Nhazi elektrọnik: PCB Board Plug - Na ịgbado ọkụ, ịgbado ọkụ FPC.
    Nkwakọ ngwaahịa semiconductor: Esemokwu etiti, ihe na-agbaso PIN.
    Ihe ndị pụrụ iche: taabụ batrị Lithy, ihe mkpuchi igwe na-emeghe.
  • Nke gara aga:
  • Osote:
  • Ultrasonic mkpu
    • Ihe emeputara ohuruedemede

    Hapụ Ozi Gị

    See ịbanye na ọchụchọ ma ọ bụ ESC imechi