Haltrasoc sprak nozzles

Mochini oa ho fafatsa oa Ultrasonic o fafatsa phallo ho PCB board

Ultrasonic spraying machine spraying flux on PCB board

Tlhaloso e khutšoane:


    Lintlha tsa sehlahisoa
    LBH
    Li-tag tsa lihlahisoa
    Mahlale a ho fafatsa altrasonic a sebelisa ho futhumatsa leqeba ho theola metsi a mangata, ho boloka tšilafalo ea 80%, ho fokotsa tšilafalo le ho laola tšilafalo ka nepo e kholo. Ho sebelisoa hohle ka mehla ea elektroniki 'me ho lebelletsoe hore e khothallelitsoe masimong a eketsehileng nakong e tlang.
    Ka nts'etsopele e tsoelang pele ea theknoloji ea indasteri, litlhokahalo tsa theknoloji ea ho etsa li tla eketsa letsatsi le letsatsi. E le lingoliloeng tse bohlokoa tsa bohlokoa tsa bohlokoa tsa ho bopa, tšebetso le ts'ebetso ea ho boloka flux li ama boleng le wedding. Theknoloji ea Frantrasoc e sebelisa matla a ultrasound ho hlakola metsi a metsi marotholi a manyane ebe o a fokotsa ho fafatsa sebaka se tiileng. Ts'ebetso ena ha e itšetlehe ka moea oa kantle ho theha phello ea athoma, empa e etsa phofu e kenang e tsitsitseng ho fihlela ho etsa moea o tsitsitseng. JESUNER oa Wortraselic e fetola matla a motlakase ho matšoao a ultrasonic, e fetotsoeng ka har'a metsi a mangata ebe a roba marotholi a manyane ntlheng ea nozzle. Marotholi ana a koahetsoe ka matla ho lekhoakhoa ha lebelo le potlakileng ka lebelo le le leng, boholo le sebopeho, li thusa ho fanyeha.

    Melemoea flueray ea ultrasonic

    1. Ngaka ea konopo ea Ultrasoc Ebang ke sebaka se bataletseng kapa sebaka se kobehileng, ebang ke sebaka se seholo kapa sebaka se senyenyane, phello e ntle e itekanetseng e ka fihleloa.

    2. Boloka lisebelisoa tse tala: mokhoa oa ho falla o hloka feela khase e nyane ho thusa ho etsa phallo ea matsibolo, e fokotsang tahlehelo ea thepa e tala. Ho latela lipalo, ha ho bapisoa le mofuta oa mofuta oa ba babeli - Mokhoa oa ho fafatsa kapa oa moea o ka boloka chelete e fetang 40% ea theko ea lihlahisoa tsa tala.

    3. Fokotsa mekhahlelo ea mantsoe: hobane theknoloji ea ultrasonic e fokotsa tahlehelo ea thepa e tala, e boetse e fokotsa ho tsoa ha lilallo le lintho tse sebetsang. Khotso ea Vocs (metsoako e sa sebetseng ea manyolo) e fokotsehile haholo, e fokotsa tšilafalo ea tikoloho. Ho latela lipalo-palo, mekhoa ea ho fafatsa us e ka fokotsa ho tsoa ha li-vocs ka tse fetang 80% ha e bapisoa le mekhoa ea setso.

    4. Fokotsa tšilafalo: Palo ea marotholi a atomeng e hlahisitsoeng nakong ea bosholu ba ultrasoc e nyane le lintho tse sebetsang ha li sebelisoe habonolo ho tikolohong e haufi. Sena ha se felise tšilafalo ea tikoloho feela, empa e boetse e fokotsa ho lemala bophelo ba motho.

    5. Pholoho ea ho falla: Lisebelisoa tsa ho fafatsa tsa Ultrasoc e ka laola khafetsa, matla le sebopeho, ka ho etsa joalo, ka ho etsa joalo, ho fafatsa. Sena ke sa bohlokoa haholo ho ho sebelisa lits'ebetso tse hlokang ho fetisisa tse hlokang ho ba le botenya ba ho roala bosholu ba koae le ntho e tšoanang.
  • E fetileng:
  • E 'ngoe:

    • 1.Ke mefuta ea Horn?

    E entsoe ke Titanium Hollow.

    2.Ke na le maqhubu a ho fana ka sprayer ea ultrasonic?

    Re na le 40kHz, 50kHz, 60kHz, 100kHz.

    3.Ke mefuta e fapaneng ea li-nozzles tseo u nang le tsona?

    Mofuta oa mofuta o pharaletseng / oa ho bokella mofuta oa molomo / oa molomo oa molomo

    4.Cna sebetsa sesebelisoa se tsoelang pele?

    Ee, e ka sebetsa lihora tse 24 e ntse e tsoela pele ha nako e telele joalo ka nako e telele e nkuoa.

    1. Ke mehato efe e pholileng e ka sebelisoang?

    Moea o pholileng ke compressor ea moea.

    1. 6. Nako ea ho tsamaisoa ke efe?

    Bakeng sa sistimi ea "nozzle" 7 - matsatsi a mosebetsi a 14, bakeng sa Machine a iphamike

    7. U na moetsi kapa morekisi?

    E, re iketsetsa thepa eohle ea UltraSonic ea Hang-hang.

    8.Ke tikolohong ea lisebelisoa tsa hau tsa Ultrasonic ea hau ea Ultrasonic?

    Jenereishene eohle ea selemo se le seng.

    9. Re ka netefatsa boleng ba tlhahiso?

    Re na le boiphihlelo ba ho hlahisa lilemo tse fetang 17 mme re na le tsamaiso ea taolo ea boleng bo thata mosebetsing oa tlhahiso. Mahlanya makhetlo a 4 bakeng sa spranaer e 'ngoe le e' ngoe ea ultrasonic ka pel'a nehelano.

  • 15khz ultrasoc ultrasoc
  • 20 khz ultrasonic hirdushr
  • Mechine ea 20Khz ultraselacus cutesoc
  • Molaetsa oa 28khz Ultranonic
  • 28Khz ultrasonic weldsoc welder
  • 35khz ultrasoc ultrasonic weldsoc
  • 40khz ultrasoc ultrasocr
  • Ultrasoc e fallisang
  • Ultrasoc e fokang
  • Lisebelisoa tsa Motheo tsa Ultrasoc
    • SehlahisoaMekhahlelo

    Tlohela molaetsa oa hau

    Otla enter ho ea batla kapa esc ho koala