I-iltrasonic putyles

Ultrasonic umatshini wokutshiza flux kwibhodi PCB

Ultrasonic spraying machine spraying flux on PCB board

Inkcazo emfutshane:


    Iinkcukacha zemveliso
    FAQ
    Iimpawu zeMveliso
    Itekhnoloji yokutshiza i-Ultrasonic isebenzisa i-ultrasonic vibrastic icofa ngokulinganayo kumhlaba oqinileyo, ukuphucula umgangatho we-welding, ukunciphisa ukungcoliseka kwama-80, ukunciphisa ungcoliseko, kunye nokulawula ukutshiza ngokuchanekileyo. Isetyenziswe ngokubanzi kwi-welding ye-elektroniki kwaye kulindeleke ukuba ikhuthazwe kumasimi amaninzi kwixesha elizayo.
    Ngokuphuhliswa okuqhubekayo kwetekhnoloji yemizi-mveliso, iimfuno zetekhnoloji ye-welding ziyanda imihla ngemihla. Njengesixhobo esiphambili esibonakalayo kwinkqubo ye-welding, ukusebenza kunye nefuthe lokufaka i-bilx kuchaphazela ngokuthe ngqo umgangatho kunye nokusebenza kakuhle kwe-welding. Itekhnoloji yokutshiza i-Ultrasonic isebenzisa amandla e-ultrasound yokwaphula i-fluex engamanzi ukuya kwi-Typles encinci kwaye ikhawuleze ukutshiza kumhlaba oqinileyo. Le nkqubo ayixhomekeki kwi-airflow yangaphandle ukwenza isiphumo se-Amitomisis, kodwa yenze i-ratical ye-rocot vibranonic vibras. Umvelisi we-ultrasonic uguqula amandla ombane kwiimpawu ze-ultrasonic, eziguqulweyo zibe zii-pibers zoomatshini, kwaye emva koko kwenziwa ikholamu ye-ultrasonic nozzle kunye nekhephu kwiincam ze-nozzle. La maqumki emva koko agutyungelwe ngokulinganayo kumphezulu oqinileyo ngesantya esifanayo, ubukhulu kunye nobume, ukufezekisa ukutshiza ngokufanelekileyo kunye neyunifomu.

    Iziboneleloye-sprassonic spray rubex

    I-1. I-iyunifomu yokutshiza: kuba itekhnoloji yokutshiza i-Ultrasonic ayixhomekeki kwi-moya engaphandle, kodwa ihamba i-quyt enye yokuhambahamba ngentshukumo ye-Ultrasonic, inokulawula ngokuchanekileyo ukuhamba okutshisayo, isantya kunye nokukhuphela ukutshiza. Nokuba ngumhlaba othe tyaba okanye umphezulu ojikelezwe, nokuba yindawo enkulu okanye indawo encinci, isiphumo esifanelekileyo sokutshiza sinokufezekiswa.

    2. Gcina izinto ezingafunekiyo: Indlela yokutshiza i-Ultrasonic ifuna kuphela inani elincinci lerhasi yokuphatha ukuncedisa ekuqulunqweni kokuhamba kwamachaphaza amahlahla, okunciphisa kakhulu ilahleko yezixhobo eziluhlaza. Ngokweenkcukacha-manani, xa kuthelekiswa nesilwanyana esizilwanyana -

    3. Ukucutha ukuphuma kwe-VOCS: Ngenxa yokuba itekhnoloji ye-prey ye-Ultrasonic inciphisa ilahleko yezixhobo eziluhlaza, ikwanciphisa ukukhutshwa kwezinyithi kunye nezinto ezisebenzayo. Ukukhutshwa kweeVOCs (iikhawuntari eziguqukayo) zincitshiswa kakhulu, zinciphisa ungcoliseko lwendalo. Ngokweenkcukacha-manani, iindlela zokutshiza ze-ultrasonic zinokunciphisa ukukhutshwa kwe-VACs ngaphezulu kwe-80% ngokuthelekiswa iindlela zemveli.

    4. Ukucutha Ungcoliseko: Inani lamathomu e-Atoming oveliswe ngexesha lenkqubo yokutshiza i-Ultrasonic incinci, kwaye izisombululo ze-flux kwaye zisebenza ngokulula kwindalo engekho mthethweni. Oku akususi nje ukungcoliseka kwezendalo, kodwa kunciphisa ingozi kwimpilo yabantu.

    5. Iphezulu - Ukutshiza ngokuchanekileyo: Izixhobo zokutshiza ze-ultrasonic zinokulawula ngokuchanekileyo, amandla kunye nesigaba samaza e-ultrasonic, kunye nobume, ubukhulu kunye ne-engile ye-cell, ukutshiza ngokuchanekileyo. Oku kubaluleke kakhulu kwiinkqubo ze-welding ezifuna ukulawulwa ngokuthe ngqo kokukhathazeka kunye nokufana.
  • Ngaphambili:
  • Okulandelayo:

    • 1.Yintoni izinto eziphilayo?

    Yenziwe yi-titanium alloy.

    2. Yintoni onokuyibonelela ngokutshintsha kwe-ultrasonic?

    Sine 40kHz, 50kHz, 60kHz, 100kHz.

    3.Unjani iintlobo ezahlukeneyo ze-nozzles?

    Uhlobo olubanzi / uhlobo lokuqokelelwa / uhlobo lomlomo olude / uhlobo lokuqhekeza

    4.Can Umsebenzi osebenza ngokuqhubekayo?

    Ewe ingenza ii-24hours ezingama-24 Qhubeka ixesha elide njengamanyathelo okupholisa kuthathwa.

    1. Ngawaphi amanyathelo okupholisa anokusetyenziswa?

    Ukupholisa umoya nge-air compressor.

    1. I-6. Liphi ixesha lokuhambisa?

    Ukutshiza kwenkqubo ye-Nozzle 7 - Iintsuku ezili-14 zomsebenzi, kuba nomatshini ozenzekelayo20 - Iintsuku ezingama-30 zomsebenzi.

    7.Umenzi okanye umrhwebi?

    Ewe, senza zonke iintlobo zezixhobo ze-ultrasonic Izixhobo.Mvee ukuya kusityelela.

    8. Yintoni iwaranti ye-plassonic yakho yokutshiza?

    Yonke ivelisi enye yewaranti yonyaka.

    9. Ungawuqinisekisa umgangatho wemveliso?

    Sineminyaka engaphezu kwe-10 ukuvelisa amava kwaye sinenkqubo yokulawula ngokungqongqo kwinkqubo yethu yemveliso. Uvavanyo lwama-4 amaxesha okutshiza nganye ye-ultradonic ngaphambi kokuhanjiswa.

  • I-15khz iltrasonic transducer
  • I-20 KHZ SURDONIC
  • I-20khz iltrasonic yokusika
  • 28khz ultrasonnic sictor
  • I-28khz iltrasonic yelter
  • I-35KHZ I-Ulfzmonic stal
  • I-40KHZ i-Ulfrason yoTshintsho
  • Ukutshiza kwe-ultrasonic
  • I-Ultrasonic Sprasning
  • Izixhobo zokutshiza ze-ultrasonic
    • ImvelisoIindidi

    Shiya umyalezo wakho

    Hit faka ukhangela okanye i-ESC ukuvala