1. Usoro nke teknụzụ ultrasonic
1.1 mmetụta cavitation nke ultrasound
Isi ụkpụrụ nke mmịpụta mmanụ ultrasonic dị mkpa bụ iji mmetụta cavitation nke ultrasound. Mgbe elu - ugboro ugboro ultrasound (ọ na-abụkarị 20 - 80khz) na-agbasa site na mmiri mmiri, na-agbanwe elu - A na-emepụta usoro nrụgide. Na ala - nrụgide nke, a na-akpụ akpụ akpụ akpụ akpụ akpụ na mmiri mmiri; Na elu - Nrụgide a A na-akpọ nsonaazụ anụ ahụ a na-akpọ "cavitation".
1.2 ọrụ nke mmetụta cavitation na mmịpụta
Ihe dị ike na-awụ akpata oyi na-efe efe na microgets na-emepụta mgbe cavitaịva anụ cavitation dara:
• Ebibila mgbidi cell na ngwa ngwa mwepụta nke sel ọdịnaya
• Kwalite mbufe ma na-akwalite ọrịa nke ngbanwe n'ime osisi matrix
• Dịkwuo nkọ ma mee ka mgbasa ozi dị iche iche dị iche iche
• Wedata Mbelata Mbelata ma na-echebe ọkụ - Ihe ndị dị nro
1.3 mmetụta kemịkal nke ultrasound - mmịpụta enyere aka
Na mgbakwunye na mmetụta anụ ahụ, ultrasound nwere ike ime ka ụfọdụ mmeghachi omume kemịkalụ:
• mepụta radicals iji kwalite mwepụta nke ụfọdụ ihe mejupụtara
• Gbanwee Polarity nke ihe mgbaze iji mee ka nsụgharị nke ihe ndị akọwapụtara
• Mee ngwa ngwa mmeghachi omume hydrolysis iji wepụta ogige dị iche iche
2.. Ihe mejupụtara usoro nke mmịpụta mmanụ
Usoro nrụpụta zuru oke - Nta ultrasonic dị mkpa na-abụkarị nke mejupụtara akụkụ ndị a:
2.1 Ultrasonic jenerato
Dị ka isi nke sistemụ ahụ, ọ bụ ọrụ maka ịtụgharị isi ike na elu dị elu - akara eletrik. Isi mmalite ndị gụnyere:
• A na-ejikarị nkeji ole na ole: 20 - A na-ejikarị 40khzz maka ihe ndị dị mkpa
• Mmepụta ike: 500W - 5000w kemeghi
• Pulso mode: Oge ọrụ / etiti oge ka enwere ike ịtọ
• Ọrụ nchedo: oke, ebe nchekwa dị mkpụmkpụ
Mgbakọ 2.2 transducer
Gbanwee ike eletriki n'ime usoro nke ọma, ọkachasị na ụdị abụọ:
Imikpu nke Imise: Otinye n'ime arịa mmeghachi omume, ike na-etinye uche, adabara maka nhazi bat
Usoro dị iche iche: A na-etinye ọtụtụ transducices na mgbidi dị na mbara ala, kwesịrị ekwesị maka nhazi usoro na-aga n'ihu
Usoro mmeghachi omume 2.3
Gụnyere:
Reviorctor (na-abụkarị 316l anaghị agba nchara ma ọ bụ titanium alloy)
Usoro Njikwa Ọnọdụ (igwe na-ekpo ọkụ ma ọ bụ ngwaọrụ ọkụ)
Ngwakọta ngwaọrụ (iji mee ka mmetụta dị mma)
Usoro iwu nrụgide (maka enyemaka dị n'okpuru)
Sistelo na Nchịkọta
Post - Nzọụkwụ Ntinye Nzọụkwụ:
Otutu - Ngwaọrụ Ntanetị
Keozobo
Ihe eji eme ihe di egwu
Sistemụ mgbake usoro
Sistemụ Sistem
A na-ejikarị ngwa ọrụ ọgbara ọhụrụ a na-enwekarị:
PLC ma ọ bụ PC Nchịkwa PC
Real - Oge nlekota nke parameters (okpomoku, nrụgide, ike, wdg)
Ndekọ data na nyocha nyocha
Ngwaọrụ nchekwa nchekwa